1. The pancing used in the lifting mechanism driven by manpower is tested with 1.5 times the rated load as the inspection load.
2. The pancing used for the power-driven lifting mechanism shall be tested with 2 times the rated load as the inspection load.
3. Sawise ingpancingdicopot saka beban inspeksi, ora kudu ana cacat utawa deformasi sing jelas, lan paningkatan derajat pembukaan ora bisa ngluwihi 0,25% ukuran asline.
4. Kanggopancings that have passed the inspection, a mark should be printed in the low-stress area of the pancing, including the rated lifting weight, factory mark or factory name, inspection mark, production number, etc.
Ingpancingkudu dibatalake nalika ana salah sawijining kahanan ing ngisor iki:
â ‘Retak;
â‘¡Kanggo bagean mbebayani tekan 10% saka ukuran asline;
â ‘¢ Gelar pambuka ditambah 15% dibandhingake karo ukuran asline;
④The torsion deformation of the pancing body exceeds 10°;
⑤The dangerous section of the pancing or the neck of the pancing is plastically deformed;
⑥The pancing thread is corroded;
⑦When the wear of the pancing bushing reaches 50% of the original size, the bushing should be replaced;
⑧ Nalika mandrel saka potonganpancingnganggo 5% ukuran asline, mandrel kudu diganti.